Standard silice sand
0.00৳
Standard silice sand NF 1097-8
Sand NF 1097-8#NF 1097-8 standard silice sand
SILICE SANDS FOLLOWING STANDARD EN 1097-8 2009
Method for determining the abrasion value of aggregates ( AAV )
PROPERTIES OF SANDS EN 1097-8
This method makes it possible to determine the abrasion value of road aggregates.
The sands produced by the SNL are the sands used to produce the test specimens.
Formulation
The fine sand less than 0.300 mm is intended for setting the aggregates at the bottom of the mold.
Abrasive sand is fine siliceous sand containing at least 96% silica. All the sand must pass through a 0.85 mm sieve and be retained on the 0.300 mm sieve. In addition, 75% of the fine sand must pass through the 0.600 mm test sieve and be retained on that of 0.425 mmm (it is kept dry in paper bags with a polypropylene fold): it will then be mixed with the resin.
Conditioning
The bags are 25 kg
- Supplier in Bangladesh- Elite Scientific & Meditech Co.
- For any queries visit us- www.elitetradebd.com
Standard silice sand NF 1097-8
Sand NF 1097-8#NF 1097-8 standard silice sand
SILICE SANDS FOLLOWING STANDARD EN 1097-8 2009
Method for determining the abrasion value of aggregates ( AAV )
PROPERTIES OF SANDS EN 1097-8
This method makes it possible to determine the abrasion value of road aggregates.
The sands produced by the SNL are the sands used to produce the test specimens.
Formulation
The fine sand less than 0.300 mm is intended for setting the aggregates at the bottom of the mold.
Abrasive sand is fine siliceous sand containing at least 96% silica. All the sand must pass through a 0.85 mm sieve and be retained on the 0.300 mm sieve. In addition, 75% of the fine sand must pass through the 0.600 mm test sieve and be retained on that of 0.425 mmm (it is kept dry in paper bags with a polypropylene fold): it will then be mixed with the resin.
Conditioning
The bags are 25 kg
- Supplier in Bangladesh- Elite Scientific & Meditech Co.
- For any queries visit us- www.elitetradebd.com
Reviews
There are no reviews yet.