IN30 Incubator 32L, Memmert, Germany

IN30 Incubator 32L, Memmert, Germany

Description

The Memmert IN30 Incubator 32L dry air incubator/thermostat  of the IN30 series  is designed for incubation of biological samples at temperatures up to +80 ° C. Thanks to carefully tuned control technology, critical temperature fluctuations are completely excluded, so the incubated samples will not be affected and will warm up especially thoroughly. The IN30 Incubator 32L, natural convection incubator has a capacity of 1.1 Cu Ft (32 L) with a temperature range of Ambient +5° to 80°C and comes with a single digital display controller. Memmert IN natural convection incubators are at home in the world of research, pharmaceuticals and food technology. The heating and control system are especially optimised for low temperatures fo up to 80°C. To prevent temperature overshoots, temperature is increased within a very narrow control range and kept exactly at the setpoint value.

The main features of Memmert IN30 Incubator 32L:

• The new ControlCOCKPIT controller has 2 versions SingleDISPLAY or TwinDISPLAY, a touch control panel and displays for temperature, humidity, fan speed, ventilation damper opening degree, interior lighting degree, overheat protection settings and real-time process graphs.
• Speed ​​up the drying process due to increased airflow due to oversized inlets and outlets
• Fan speed and motorized damper position are controlled by the ControlCOCKPIT on all Memmert equipment
• Sending notifications about abnormal situations by e-mail using the AtmoCONTROL software or by SMS notification (option)
• All new generation devices come standard with an Ethernet communication interface
• Devices with TwinDISPLAY control panel are equipped with a USB port as standard
• Using high quality stainless steel
• Heating from 4 sides for more uniform temperature distribution and heating of samples inside the chamber
• Improved thermal insulation and an optimized heating system have increased the heating rate by up to 30%
• The special design of the door handle allows you to open / close the door with almost any part of the body, in case your hands are busy
• Possibility to change the opening side of the door without the involvement of certified specialists
• New intuitive AtmoCONTROL PC software for programming and process documentation
• Built-in timer from 1 min to 99 days 23 h
• HeatBALANCE technology that allows you to adjust the distribution of power between the upper and lower parts of the heating
• IN30 Incubator 32L Natural convection
• Stainless steel interior
• IN30 Incubator 32L temperature range up to +80°C
• Digital PID-microprocessor controller with a high-definition TFT-color display
• Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
• double doors (interior glass, exterior stainless steel) to view samples easily without compromising the temperature
• activation of sterilization routine with TwinDISPLAY (PLUS models)
• 3 year warranty

IN30 Incubator 32L, Memmert, Germany

Technical Specifications IN30 Incubator 32L:

Temperature

• Setting temperature range: +20 to +80 °C
• Working: temperature range: at least 5 above ambient temperature to +80 °C
• Setting accuracy temperature: 0.1 °C
• Temperature sensor: 1 Pt100 sensor DIN class A in 4-wire-circuit

Control technology

• Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
• ControlCOCKPIT: SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
• Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
• Function SetpointWAIT: the process time does not start until the set temperature is reached
• Calibration: three freely selectable temperature values
• adjustable parameters:  temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime

Ventilation

• Convection: natural convection
• Fresh air: Admixture of pre-heated fresh air by electronically adjustable air flap
• Vent: vent connection with restrictor flap

Communication

• Documentation: programme stored in case of power failure
• Programming: AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).

Safety

• Temperature control: adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
• Autodiagnostic system:  for fault analysis

Standard equipment

• Works calibration certificate: incl. works calibration certificate for +37°C
• Door: fully insulated stainless steel door with 2-point locking (compression door lock)
• Door: inner glass door
• Internals: 1 stainless steel grid(s), electropolished

Stainless steel interior

• Interior: easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
• Volume: 32 l
• Dimensions: w(A) x h(B) x d(C): 400 x 320 x 250 mm
• Max. number of internals: 3
• Max. loading of chamber: 60 kg
• Max. loading per internal: 20 kg

Textured stainless steel casing

• Dimensions: w(D) x h(E) x d(F): 585 x 704 x 434 mm (d +56mm door handle)
• Housing: rear zinc-plated steel

Electrical data

• Voltage Electrical load:   230 V, 50/60 Hz; approx. 1600 W
• Voltage Electrical load:   115 V, 50/60 Hz, approx. 800 W

Ambient conditions

• Set Up:  The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
• Altitude of installation: max. 2,000 m above sea level
• Ambient temperature: +5 °C to +40 °C
• Humidity rh: max. 80 %, non-condensing
• Overvoltage category: II
• Pollution degree: 2

Packing/shipping data

• Transport information: The appliances must be transported upright
• Customs tariff number: 8419 8998
• Country of origin: Federal Republic of Germany
• WEEE-Reg.-No.: DE 66812464
• Dimensions approx incl. carton: w x h x d: 660 x 890 x 650 mm
• Net weight: approx. 48 kg
• Gross weight carton: approx. 64 kg

Images are reference only. Actual product may be different.

Click Our Social Network Links

• Best seller & Supplier in Bangladesh
• Elite Scientific & Meditech Co.
• Google, Facebook, LinkedIn, Twitter, Instagram

Download Catalogue

Natural Convection Incubator, IN30, 32 L