Glass marbles NF EN 13036-1 standard

Glass balls NF EN 13036-1, NF EN 13036-1 standard glass balls

Surface characteristics of roads and airports
Characteristics
The glass beads, entirely spherical and calibrated are clean, dry, prepared in a modern workshop offering all guarantees of quality and regularity.
Conditioning
These balls are packaged in 5 kg and 15 kg buckets and sold in articles:
• Set of 5 buckets of 5 kg
• Set of 10 buckets of 5 kg
• Set of 2 buckets of 15 kg
• Set of 6 buckets of 15 kg
Each order is delivered on a pallet with plastic film protection.
Controls
The particle size determined by sieving complies with the requirements of standard NF-EN 13036-1: at least 90% of the mass of the balls has a diameter between 0.18 mm and 0.25 mm.
Application areas
Measurement of the average depth of the surface macrotexture of a road pavement using a volumetric on-the-job technique.
The method can be used on a wide range of surfaces. However, care should be taken in interpreting the results when the measured depth is outside the interval (0.25 – 5 mm).
EN 13036-1 – Tests relating to pavements
Measuring the macrotexture depth of the surface of a pavement using a volumetric on-the-job technique:
• sand glass beads.

OTHERS RELATED PRODUCTS by SNL

CONCRETE LABORATORY PRODUCTS

• Sulfur in lentils
• Sand for sulfur sand mixture
• Sand MBE (Equivalent Concrete Mortar)
• Sand standards according to DIN or ASTM
• UKAS 22 standard sand
• Sand EN 480-13
• 0/20 sand standardized to EN 1766 2000-03
• Sand on demand
• Sulfur mortar Type BP 18-416
• Sulfur mortar Type AP 18-416
• Sulfur mortar NF 12390-3
• Sulfur flowerCEMENT LABORATORY PRODUCTS
• Sand CEN EN 196-1
• Sand CEN EN 196-9
• Sand BS 4550
• Sand IS650
• Calibration sand for roller mill calibration
• Sand EN 480-13
• Sand CEN BS 196-1
• Sand ASTM C778 graded
• Sand ASTM C778 20-30
• Sand on demand
• Reference materials: SN2 Bga and SN2 ca
• Reference materials: other products
• Reference materials: aluminas
• Sand BS1881 Part 131 from A to E
• Sand MBE
• Blaine Apparatus

AGGREGATE LABORATORY PRODUCTS

• Standard sand (UKAS 22) for sieve
• Standard sand EN 932-5
• Standard sand (DIN / ASTM) for sieves
• Sand on demandROAD LABORATORY PRODUCTS
• Sand NF 1097-8
• Sand reference HSV P 98-216-1
• Sand NF 66-061
• Sand on demand
• Glass balls NF EN 13036-1
• ASTM E 965-96 glass beads

SAND ON DEMAND

• Sand for fuses
• Water filtration EN 12904
• Sand BS 1377 PART 9 or ASTM 1556
• Sand to be stripped
• Innovative products on demand
• Supplier in Bangladesh- Elite Scientific & Meditech Co.
• For any queries visit us- www.elitetradebd.com