Dry Block Digesters for Kjeldahl Method

0.00৳ 

Configured for use with distillation and digestion tubes of up to 250 mL, 42 mm Ø x 300 mm, these Macro Version Dry Block Digesters are available in 3 models, the Macro Bloc Digest 6, Macro Bloc Digest 12 or Macro Bloc Digest 20 for 6, 12 or 20 tubes respectively. A typical system includes the block digester, control module, tube support rack, gas collector and tubes. Micro Versions are available for 12, 24 and 40 tubes of 26 mm Ø x 300 mm
Also available for safety, convenience and to save water is a Scrubber, re-Circulating Vacuum Pump and a Water Jet Pump. Rose Scientific provides supplies including tubes for Tecator Digestion Unit 8 and 20 or devices such as the Foss-Tecator Model 2010.

Features of the Dry Block Digesters:

  • Minimal sample manipulation
  • Uniform heating
  • Capacity to store 20 programs of 4 steps for temperature and time
  • Gas collection system
  • Programmer, Time and Temperature display
  • Temperature selection from 45 to 450 °C
  • Maximum time per step: 600 minutes, K type temperature sensor
  • An acoustic and indicator lamp show when the unit has reached the end of the final cycle
  • Safety alarm operates if the temperature probe fails
  • A selector switch at the back of the unit for Kjeldahl assays
  • All models are supplied with a Tube Rack with integrated heat shields
Specifications
Model: Macro Dry Block Digester
Temperature Range: (ºC) 45 to 450
Memory: 20 × 4 steps program
Controller: Microprocessor
Maximum Time Per Step: (m) 600
Run Time: (min:sec) << 99:59, continuous or pulsed
Alarm: Acoustic
RS-232 Port: Temperature register & program from PC
Power: (V, Hz, W) 230, 60, 2500
Dimensions: (W x D x H) mm 440 x 390 x 180 ( Block only)
Weight: 35kg

Reviews

There are no reviews yet.

Be the first to review “Dry Block Digesters for Kjeldahl Method”

Your email address will not be published. Required fields are marked *